Option 1: a USB-C supply that can negotiate up to such a voltage. For good performance and soldering experience, a USB-C PD65W, 20V, 3+ A charger is recommended (suitable for most users). Generally, a higher power charger is better; a 20V power supply will give better performance than a 15V charger. The Pinecil needs a minimum of 3 amps and will work with higher amps charger. However, do not exceed the volts rating for V1 and V2 models or damage to components could occur (see the side of the Pinecil handle for the maximum volts). If the tip moves a little while using it, try to hold Pinecil with the screen facing the side or screen downwards. Members found that if the screen is up and the screw loosens during use, then the tip wobbles a little. Changing holding angles helps the tip press against the solid barrel instead of wobbling on the stub of the small screw.

Pinecil Smart Portable Soldering Iron – KEEBD Pinecil Smart Portable Soldering Iron – KEEBD

Build quality… Well the USB-PD Chip is rated 28V absolute maximum, but only 21V recommended. If you connect 24V on the barrel, the chip will be powered outside of its recommended specs which might impact lifetime. EPR is new technology in 2022. Theoretically Pinecil could get a max of 28V and 126W using EPR chargers & EPR cables (natural loss of 140W to 126W due to Tip ohms).

It is really making ‘it’ work better if the ‘it’ was awful to the point of rebuild from nearly the ground up, with just a little of the the ‘it’ left in… MCU – Bouffalo Lab BL706 32-bit RISC-V microcontroller @ 144 MHz with 132KB SRAM, 192KB ROM, optional embedded flash, Bluetooth 5.0 LE and 802.15.4 (Zigbee) connectivity Types Mini Stainless Steel Soldering Iron Tip Replacement for TS100 Portable Outdoor Soldering Iron Kit (1pc TS-D24 Soldering tip)

Pinecil in Europe? : r/PINE64official - Reddit How to get the Pinecil in Europe? : r/PINE64official - Reddit

The bottom-front screw only holds the handle together and does not touch the tip, hence is a shorter m2x 3mm. see: PINE64official/comments/xjt82v View: https://www.reddit.com/r/PINE64official/comments/xjt82v/new_pinecil_owners_firmware_tips_info/ Reply Wasn’t said what the original micro was. Patent for that was filed in ’97 but they didn’t come to market until 2007. Older style chargers could become dangerously hot, whereas GaN can stay cooler, even in a smaller size.If the GaN charger senses a potentially dangerous condition, i.e., overcurrent spikes, the chips are designed to go into a cycle-by-cycle sleep state, protecting the device. Over current protection in GAN. The BL706 RISC-V microcontroller is similar to the BL602 found in the PineNut module/ PineCone board, except it adds extra I/Os and offers BLE or 802.15.4 radios instead of WiFi and BLE. There are two main potential cases to make use of the Bluetooth LE features the first one being OTA firmware upgrade and the second is remote telemetry and control, for example, to automatically turn on and off an air vent while soldering. While BL706 is already supported by the IronOS open-source firmware, BLE support is not currently implemented and features such as OTA and telemetry will take a fair amount of time to implement. Siglo also received a few updates and released version 0.9.9 at the beginning of this month. In contrast, InfiniLink, the iOS companion app for InfiniTime, is still looking for a maintainer. Xan-m, the original author, announced a while ago that they would not be able to maintain the project and that they would transfer the project to anyone interested to take over it. In the meantime, the Github project was transferred to the InfiniTime organization on Github. We also plan on transferring the app to an Apple developer account managed by Pine64 to ensure that the app will be available on the app store when Xan-m’s account expires. Portable and features a sleek and slim design, comprised of an SAE 304 stainless steel core housed inside a polycarbonate shell.